- Member ID
- #11903
- Messages
- 6,860
- Reactions
- 5,683
- Likes
- 402
- City
- Orlando
- State
- FL
- Country
- United States
- Vehicle
- 2015 Dodge Challenger Hellcat
-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Dodge, Jeep and RAM Forum dedicated to FCA owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the SRT Forum today!
Best 15” conversion on the market
- Thread starter Unholy707
- Start date
- Member ID
- #1626
- Messages
- 78
- Reactions
- 152
- Likes
- 17
- City
- Port Stanley
- State
- Non-US
- Country
- Canada
- Vehicle
- Challenger Redeye
I went with the Dusterhoff Racing 15" rear brake conversion. The reason I went with their kit was because it retains use of the factory parking brake.
The only grinding I had to do was on the sway bar link mount. It is a well put together kit with no surprises, well besides the Wilwood pads dust just as much if not more than factory Brembo pads, I wasn't expecting that.
The only grinding I had to do was on the sway bar link mount. It is a well put together kit with no surprises, well besides the Wilwood pads dust just as much if not more than factory Brembo pads, I wasn't expecting that.
- Member ID
- #9039
- Messages
- 1,262
- Reactions
- 1,825
- Likes
- 162
- City
- Kingsport
- State
- TN
- Country
- United States
- Vehicle
- Trackhawk, RS3 Swapped Golf R, Turbo Stang, Golf R
U have a couple of different options depending on how well u wanna stop. There are a few conversions out there that are more Drag related and u have some that are more Street related.
The drag stiff will be slightly lighter of course.
I would be looking at the new Street stuff that TBM released it will offer the best in performance and price imo. The kit offered by Dusterhoff is just the Wilwood kit and imo its more track related. The TBM stuff only works with an outter bead locked rim IF u have bead locks FYI which is normal. Double beading locking isnt common.
Should also shave about 10 lbs of rotating mass over stock.
Wilwood Kit (Same as Dusterhoff): https://shophellcat.com/product/tce-wilwood-rear-drag-brake-kit-for-challenger-charger/
TBM: (Gives Color Option Which Is Cool) https://tbmbrakes.com/products/15-2...12-19-brake-kit-pre-order-ship-6-17-6-21-copy
BMR Carlyle (Best Street Kit Complete NO GRINDING Comes With Billet Spindles): https://shophellcat.com/product/srt-15″-conversion-kit/
Carlyle (Good kit buddy runs this on his Hellcat): https://www.montmotorsports.com/car...aET_Yyh0T4gJsHAXQw0WcMFQWojpvxuYDCMckWd4Cijsz
The MT Pro Bracket Radial 15 inch is the tire I would recommened. https://www.mickeythompsontires.com/drag-tires/pro-bracket-radial
15's just give such a badass look to. Here is a set of my Mustang I have the Baer stuff front and rear now so I could run the RC Componets. Dont have pic of those tho but they are on now and they are super light.
The drag stiff will be slightly lighter of course.
I would be looking at the new Street stuff that TBM released it will offer the best in performance and price imo. The kit offered by Dusterhoff is just the Wilwood kit and imo its more track related. The TBM stuff only works with an outter bead locked rim IF u have bead locks FYI which is normal. Double beading locking isnt common.
Should also shave about 10 lbs of rotating mass over stock.
Wilwood Kit (Same as Dusterhoff): https://shophellcat.com/product/tce-wilwood-rear-drag-brake-kit-for-challenger-charger/
TBM: (Gives Color Option Which Is Cool) https://tbmbrakes.com/products/15-2...12-19-brake-kit-pre-order-ship-6-17-6-21-copy
BMR Carlyle (Best Street Kit Complete NO GRINDING Comes With Billet Spindles): https://shophellcat.com/product/srt-15″-conversion-kit/
Carlyle (Good kit buddy runs this on his Hellcat): https://www.montmotorsports.com/car...aET_Yyh0T4gJsHAXQw0WcMFQWojpvxuYDCMckWd4Cijsz
The MT Pro Bracket Radial 15 inch is the tire I would recommened. https://www.mickeythompsontires.com/drag-tires/pro-bracket-radial
15's just give such a badass look to. Here is a set of my Mustang I have the Baer stuff front and rear now so I could run the RC Componets. Dont have pic of those tho but they are on now and they are super light.
Last edited:
