Let’s build a race car

[RGPIII]

Love my NW 130. Had his 108 on my 2.4's and 2.7 blowers cant go wrong with it! looks great buddy!

 

[fumanchu182]

I already

I’m currently designing a 2” spacer with custom ic core for the lid with an air foil to direct the air through it.

Are you now? Well my prototype is about to be made. How far along are you?

 

[Unholy707]

Are you now? Well my prototype is about to be made. How far along are you?

Thats just what I’m working on, not too far along. Been in the planning and design stages for a while

 

[fumanchu182]

results of not cutting holes into the diaper. Did it affect performance no, did it shorten the lifespan of the blower… who knows?
Hi ho, hi ho… off to Kong Performance we go!

 

[fumanchu182]

To clean off the sticky and icky from the bottom, I used gasoline and then wiped it with simple green.

@fumanchu182 , need to get them vents open or your going to blow the seals out of your supercharger.

Would anything on the blanket indicate that?

YES, just use a sharp object to poke a hole and move the material back around the rounded boss. Easy peasy.

Just in case you were wondering.

View attachment 113855

😂

Ever remove a glued on blanket? Stuff seals like Flex Tape. Send a blower in for repair with a blower blanket stuck to it and they’ll send it back to you or charge you hundreds to remove it and it’s residue left after pealing it off.

I like Kong so I took it off and cleaned it well. Gasoline took it right off.

 

[fumanchu182]

240.00 to ship, cost more in insurance than the shipping… insured for 7k large. If it goes tits up, a basic whipple will be sourced

 

[Unholy707]

240.00 to ship, cost more in insurance than the shipping… insured for 7k large. If it goes tits up, a basic whipple will be sourced

Shipping? Dude their shop is mere hours from you lol

 

[fumanchu182]

Shipping? Dude their shop is mere hours from you lol

And you manage my schedule? Know what my plans are? Know I have all the time in the world to drive to PA and back… seriously… 🖕

 

[Unholy707]

Was just messing with you man, geez

 

[fumanchu182]

goodbye cancer bumper
Meet my precision body work tool, the stanley hooker
Its on!
The fender is severely fcked, this was held in with screws. Did my best to get a bolt in there. Next year its getting front halved.
Bumper feels 10x better and a little more rigid.

 

[Unholy707]

View attachment 122595
goodbye cancer bumper View attachment 122596
Meet my precision body work tool, the stanley hooker View attachment 122597
Its on! View attachment 122598
The fender is severely fcked, this was held in with screws. Did my best to get a bolt in there. Next year its getting front halved. View attachment 122599
Bumper feels 10x better and a little more rigid.

Getting there! Gotta rip out the electric steering! I’m sure someone will but that

 

[fumanchu182]

Getting there! Gotta rip out the electric steering! I’m sure someone will but that

The flaming river setup will be purchased next month. Actually I need to do some research to make sure it will fit.

 

[Marc W]

Getting there! Gotta rip out the electric steering! I’m sure someone will but that

What you mean somebody. Flaming River

 

[fumanchu182]

What you mean somebody. Flaming River View attachment 122605

Do you think that will fit on a 2012 Charger Chasis without doing as much customization as you? I was just browsing your thread and found the same post

 

[Marc W]

Do you think that will fit on a 2012 Charger Chasis without doing as much customization as you? I was just browsing your thread and found the same post

I think it will but not sure on what differences you might have vs the later model. The only mod to the frame/cradle I did is for the rear sump pan. Didn’t have anything to do with the steering.

 

[fumanchu182]

cleaned up the cooling bricks

I really have some early model parts.

Before

After


Waiting on some fittings. Those hose barbs are being converted to AN fittings stay tuned.

 

[DavidKFla]

cleaned up the cooling bricks
View attachment 123555
I really have some early model parts. View attachment 123556
Before View attachment 123557 View attachment 123558
After View attachment 123559 View attachment 123560
Waiting on some fittings. Those hose barbs are being converted to AN fittings stay tuned.

Images don't display. Only shows links.

 

[fumanchu182]

Images don't display. Only shows links.

Trying to fix it, the forum is being fucking retarded right now.

 

[Unholy707]

Do

cleaned up the cooling bricks
View attachment 123566
I really have some early model parts.
View attachment 123561
Before View attachment 123563
View attachment 123562
After
View attachment 123565
View attachment 123564
Waiting on some fittings. Those hose barbs are being converted to AN fittings stay tuned.

Do you have to weld the AN fittings in or do those actually come out? Cleaned up nice

 

[Tuckerracing]

You have to weld in the AN fittings.