How to did track prep off car?

[Unholy707]

Hey guys, any pointers on the best way to get sticky track prep off the car? Tried alcohol, tried goof off. Open to suggestions

 

[fumanchu182]

I use bug n tar remover, let it set for the time in the instructions. then using a blue paper towel wipe from top to bottom in vertical motion push the shit to the bottom. do this TWICE! then clean as normal

 

[fumanchu182]

https://www.turtlewax.com/products/bug-tar-remover-trigger-16-fl-oz

i buy this product in bulk, buy a bottle and give it a shot. also do not use any of your normal cleaning rags/sponges/whatever, you will ruin them

 

[covidcommander]

https://www.amazon.com/Mothers-0922...ocphy=9007862&hvtargid=pla-471461195423&psc=1

 

[Unholy707]

St

https://www.turtlewax.com/products/bug-tar-remover-trigger-16-fl-oz

i buy this product in bulk, buy a bottle and give it a shot. also do not use any of your normal cleaning rags/sponges/whatever, you will ruin them

Stuff works really good man lot of elbow grease but it’ll working thanks for the suggestion

 

[moparjim]

I use Simonize bug and tar remover. (It's what I had) I apply it and let it sit for a few seconds. Then wipe off and wash afterwards.
I also spray the 1/4's with Stoner's trim shine at the track to help with clean up. Then clean with a spray detailer, followed by the b&T remover.

 

[Unholy707]

I have so much in the car it’s insane

 

[RGPIII]

WD40.

 

[Unholy707]

WD40.

I got most of it off only took hours

 

[Unholy707]

Stuff was like melted gum

 

[moparjim]

The Stoners trim shine helps a bunch. I have very little to clean up with the B&T remover.
I also spray it on my wheel liners and inside the back bumper. Makes it much easier to clean. With as many passes as my car has it would weigh more than a Charger by now.🤣

 

[Hatermkr]

Wax and grease remover.

 

[vortecd]

Our track must not use it since I never find it on my car. Having splash guards does hurt either

 

[DavidKFla]

Try coating the wheelwells with original PAM.

 

[SilverBillet]

WD40 is great for removing rubber off the quarters without hurting the finish. Wash off with soapy water afterwards

 

[sc4.6]

I use Geddex Burnout Guard for track days; you can get the rubber off with a pressure washer if using this stuff.

https://www.summitracing.com/parts/ged-321

 

[GNBRETT]

If u PPF that area the shit comes right off with WD40

Hey guys, any pointers on the best way to get sticky track prep off the car? Tried alcohol, tried goof off. Open to suggestions

 

[Unholy707]

Wow lots of great tips here guys keep ‘em coming!

 

[Unholy707]

Try coating the wheelwells with original PAM.

Interesting!

 

[Unholy707]

If u PPF that area the shit comes right off with WD40

I have some spare PPF slivers, I used a little around my wheels weeks when I put the flares on so they didn’t damage the paint underneath. Maybe I’ll put some
On there next time and just rip it off. Probably would look better than painters tape