"Project Demons Breath"

[BULL]

Isn't your car a 2016 like mine?
I am pretty sure it can only be done with a 2018+ car as some models had electric steering.

Right, this makes sense I guess, the "hooks" are already there for adding it in?

 

[Hpindy]

3 major components need to be addressed. Obviously the rack needs to be changed . One if the big things is the engine bay harness needs to replaced with one that has the connectors for the electric rack on it . Then various modules in the car need to programmed to accept the electric steering rack . My car is a 2018 and shares a few modules with the demon ( same part numbers) I got a harness and rack from a demon . I'm not sure if the 2015-2017 cars have the option to active the electric steering.

On a plus note my new harness also has all the chiller connectors so I will be trying to adapt the chiller to my car next winter .
@BULL
Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Fun fact for today .....

ALWAYS use a funnel when pouring oil in your car or chances are you are going to spill on your brand new ceramic coated headers !

Sent from my BBF100-2 using Tapatalk

 

[DemonSRT]

Fun fact for today .....

ALWAYS use a funnel when pouring oil in your car or chances are you are going to spill on your brand new ceramic coated headers !

Sent from my BBF100-2 using Tapatalk

You didn't use a funnel?
Bad boy!!
That's it, your not going near my Demon.
Just kidding.
At least you know not to do that again.

 

[Hpindy]

You didn't use a funnel?
Bad boy!!
That's it, your not going near my Demon.
Just kidding.
At least you know not to do that again.

It was the "top off" at the end . Thats what being lazy gets you .

Sent from my BBF100-2 using Tapatalk

 

[fumanchu182]

✋🍆💦

that's what this thread is doing right now

 

[Hpindy]

that's what this thread is doing right now

That's aggressive right there !

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

Guess who's new engine is back on the liquor !.


Sent from my BBF100-2 using Tapatalk

 

[fumanchu182]

Guess who's new engine is back on the liquor !.
Sent from my BBF100-2 using Tapatalk

Quit hogging OST, need them to look at my race logs! LoL j/k, congrats man!

 

[Hpindy]

Quit hogging OST, need them to look at my race logs! LoL j/k, congrats man!

Lol no worries I`m doing this on my own at the moment . I`m trying not to bug Mike to much .

 

[Hpindy]

Fun fact of the day .......


Here is some math fun .
19 psi + E55 + stock Pirellis = the need for adult diapers !

Sent from my BBF100-2 using Tapatalk

 

[Hpindy]

I can honestly say my car makes a solid 708 Hp now !

Sent from my BBF100-2 using Tapatalk

 

[Grape Ape]

I can honestly say my car makes a solid 708 Hp now !

Sent from my BBF100-2 using Tapatalk

At 2/3 throttle...

 

[Hpindy]

Well boys and girls . I finally got rid of the factory pirellis. I told the tire guy to run them through the band saw a few times for me . .
I got a good used set of firestone fire hawk 500"s donated to me . They are about 60% . They are 305/35/20's . While not optimal I put them on my factory rims .
All I can say is WOW what a difference over the factory grease discs .

Thanks @Tae1974 for the unforeseen donation !

Sent from my BBF100-2 using Tapatalk

 

[Speedy!]

Wait till you try a 555RII

 

[Hpindy]

Wait till you try a 555RII

I will in the future . These current tires will hold me over till I pay off my current " winter upgrade" tab lol .

Sent from my BBF100-2 using Tapatalk

 

[DemonSRT]

I will in the future . These current tires will hold me over till I pay off my current " winter upgrade" tab lol .

Sent from my BBF100-2 using Tapatalk

I like this one. lol

 

[FFBOS]

Once you start street driving on 17’s you’ll never go back to 20’s lol

 

[Hpindy]

Well out for some more testing . A couple of things . At 38F my car makes 19 psi ( 2.30 Pratio) and at 72F it makes 18 psi ( 2.25 Pratio ) . These are peak numbers . Also I see 18 inches of vacuum at hot idle . My car made the best of 16 inches before.

And those blasted header collector bolts loosened up AGAIN ! WTF I need to figure out a new way of connecting the headers to the exhaust.

Sent from my BBF100-2 using Tapatalk

 

[Whatknot]

Weld.